Go Back Customers Section : Vita Spas Portable hot tubs

Troubleshooting Assisitant Index

Diagnosis Solutions are not a replacement for a qualified technician

Solutions are not in any particular order
Heater

Problem		Solutions to assist with repair
No Heat (no icon)		Economy mode without proper programming Heat day not set Temperature not set Bad Heater - not enough amp draw

No heat (icon on)		Check temperature set for individual days Possibly bad heater element Not enough amps to heater-verify voltage in

No heat on high (icon on)		Possible bad heating element Check temperature set Not enough amps to heater-verify voltage in

No heat on high (icon off)		Check amp settings on main circuit board Low heat possible heater element Economy mode without proper filter set Temperature not set Possibly bad sensors

Overheat		Economy filter set too long Pumps running continuous Pressure switch stuck

Heater is turned up and breaker trips		Replace heater assembly - Short in heater Heater element may have a crack so it may take a little while before it trips

Temperature is more than 3 degrees off from topside reading		Replace temp sensor possible corrosion on tip.

Heater